Product Range - FLOAT VALVES

heaters

flush valves

float valves

terms

f.a.q.

contact

Description

Part Code

Side Entry Float Valve with
Brass Shank.

£15.10

400UK073 1/2" BOTTOM INLET FLOAT VALVE

Height adjustable (230 - 355mm / 9 - 14")
One product fits most cisterns
Water supply enters cistern from below water level eliminating cascading noise
Fast, quiet refill with absolute shut off after every flush
Available with 1/2" UK and 3/8" European threads.

Description	Part Code	Price	P&P	Total
1/2" Bottom Inlet Float Valve.	400UK073	£10.45	£3.00	£13.45

400E014 3/8" BOTTOM INLET FLOAT VALVE

Height adjustable (230 - 355mm / 9 - 14")
One product fits most cisterns
Water supply enters cistern from below water level eliminating cascading noise
Fast, quiet refill with absolute shut off after every flush
Available with 1/2" UK and 3/8" European threads.

Description	Part Code	Price	P&P	Total
3/8" Bottom Inlet Float Valve.	400E014	£13.10	£3.00	£16.10

747UK073 1/2" SIDE INLET FLOAT VALVE


	Unique tank fill method - ends noisy late night storage tank refills New compact design - ideal for modern slim line / small volume (6 litre) cisterns and storage tanks Fast quiet refill with absolute shut off after every flush Unique quick release design - no need to disconnect supply pipe work for access Available with 1/2" UK and 3/8" European threads.

Description

Part Code

Price

P&P

Total

1/2" Side Inlet Float Valve.

747UK073

£10.45

£3.00

£13.45

747EP043 3/8" SIDE INLET FLOAT VALVE

	Unique tank fill method - ends noisy late night storage tank refills New compact design - ideal for modern slim line / small volume (6 litre) cisterns and storage tanks Fast quiet refill with absolute shut off after every flush Unique quick release design - no need to disconnect supply pipe work for access Available with 1/2" UK and 3/8" European threads.

Description

Part Code

Price

P&P

Total

3/8" Side Inlet Float Valve.

747EP043

£13.10

£3.00

£16.10

PR045B BOTTOM ENTRY FLOAT VALVE WITH BRASS SHANK

This unique float valve has a brass shank which makes it virtually impossible to cross thread
Height adjustable (230 - 355mm / 9 - 14")
One product fits most cisterns
Water supply enters cistern from below water level eliminating cascading noise
Fast quiet refill with absolute shut off after every flush
Available with 1/2" Shank suitable for most applications.

Description	Part Code	Price	P&P	Total
Bottom Entry Float Valve with Brass Shank.	PRO45B	£12.10	£3.00	£15.10

PRO75B SIDE ENTRY FLOAT VALVE WITH BRASS SHANK

Unique tank fill method - ends noisy late night storage tank refills
New compact design - ideal for modern slim line / small volume (6 litre) cisterns and storage tanks
Fast quiet refill with absolute shut off after every flush
Fitted with brass shank making it virtually impossible to cross thread
Unique quick release design - no need to disconnect supply pipe work for access
1/2" shank suitable for most applications.

REPLACEMENT WASHERS

The Fluidmaster Advantage

In the environment conscious climate we live in today we're all too aware of the need to reduce pollution, keep a small carbon footprint and save water.

Our range of products will therefore come as a breath of fresh air, where for a minimal cost, you can replace your old fashioned syphon and ball cock cistern for a modern Fluidmaster product.

The Fluidmaster cistern uses a float valve which is quiet and efficiently replaces the water as it is used, whilst the flapper allows a small or larger amount of water to pass into the toilet bowl to rinse efficiently and effectively. This allows just enough water to do the job without flushing away water wastefully.

Fluidmaster products are easy to fit for a person familiar with DIY. Alternatively, you could call on the services of a friend with DIY experience or a plumber.

Today cisterns are made to hold 6 litres of water. When siphons were first introduced, they had 12 litres to use. The siphon worked well with this large amount of water as this is what they were designed to use. However, due to sensible regulations it has gone down eventually to the current 6 litres.

Current syphons are inefficient when compared with Fluidmaster products which are designed to work with less water in the first place.

A Fluidmaster flapper is capable of dispensing the correct amount of water for the job and has a built in overflow. This removes the need for the a costly overflow pipe during installation.